Optika Polarizing microscope B-383POL

Optika Polarizing microscope B-383POL

A premium polarizing microscope that sets new standards for crystal structure analysis in laboratories and educational settings with exceptional optical precision and cutting-edge technology!

Technical data:

Observation Modes:

• Brightfield, transmitted polarized light, and conoscopy

Bertrand Lens and Polarizing Attachment:

• Swing-out type with centering mechanism for observation in conoscopy/orthoscopy
• Rotatable analyzer from 0° to 90° with graduated scale
• Tint plates: 1st order red (λ), λ/4, quartz wedge

Head:

• Trinocular (fixed 50/50), 30° inclined, 360° rotatable

Interpupillary Distance:

• Adjustable between 48 and 75 mm

Dioptric Adjustment:

• On the left eyepiece tube

Eyepieces:

• WF10x/20 mm, high eye-point, secured by screws
• One eyepiece with crosshair

Nosepiece:

• Quadruple revolving nosepiece with ball bearing rotation
• Centering mechanism for each objective

Objectives (strain-free):

• IOS N-PLAN POL 4x/0.10
• IOS N-PLAN POL 10x/0.25
• IOS N-PLAN POL 40x/0.65
• IOS N-PLAN POL 60x/0.80
• All with anti-fungus treatment

Specimen Stage:

• Rotatable stage with locking mechanism
• Vernier scale with accuracy of 0.1 mm
• Diameter: 160 mm
• Specimen slide clamps

Focusing:

• Coaxial coarse (adjustable tension) and fine focusing mechanism with a stop to prevent contact between objective and specimen

Condenser:

• Abbe N.A. 1.25, with objective-coded iris diaphragm, focusable and centerable
• With rotatable polarizing filter

Transmitted Illumination (Fixed Koehler Type):

• X-LED3 with white 3.6 W LED (6,300 K) and brightness control
• Multi-plug 100-240 Vac/6 Vdc external power supply

Accessories Instruction manual and dust cover included.

Application Instructions:

Microscopy Environment
This microscope should be used in a clean, dry, and shock-free environment with a temperature range of 5°–40°C and a maximum relative humidity of 85% (non-condensing). Use a dehumidifier if needed.

Cleaning the Optics

• If optical components need cleaning, first try using compressed air.
• If this is not sufficient: Use a soft, lint-free cloth with water and mild detergent.
• As a final option: Use a cloth dampened with a 3:7 mixture of ethanol and ether.
  Note: Ethanol and ether are highly flammable liquids. Do not use them near heat sources, sparks, or electrical equipment. Work in a well-ventilated room. Remember never to wipe optical surfaces with bare hands. Fingerprints can damage the optics. Do not disassemble objectives or eyepieces in an attempt to clean them.

Legal Notes

Safety:
We accept no liability for damages caused by improper and/or non-recommended use. Please carefully check the suitability of the product before alternative use.

Important Notes During and After Use

• The microscope should always be kept vertical during transport to prevent moving parts, such as the eyepieces, from falling out.
• Never handle the microscope improperly or apply unnecessary force.
• Never attempt to service or repair the microscope yourself.
• After use, immediately turn off the light, cover the microscope with the provided dust cover, and store it in a dry and clean place.

Electrical Safety Precautions

• Before connecting the power supply, ensure that the regional voltage matches the operating voltage of the microscope and that the lamp switch is in the OFF position.
• Users must comply with all regional safety regulations.
• The microscope has the CE safety label, but users are fully responsible for safe operation.

If you need to send the microscope for maintenance, please use the original packaging.

Manufacturer Information According to EU Regulation 2023/988:
OPTIKA S.r.l.
Via Rigla, 30
24010 - Ponteranica (BG) - Italy
E-Mail: info@optikamicroscopes.com